How To Remove Towel Bar With Slot | Work With Every Towel Bar -Surprising Information

The towel bar is an essential part of the bathroom. The towel bars are not made from very hard material, breaking when light pressure is applied.

If your towel bar in your bathroom is broken, you need to remove it with the slot and insert a new one. So, how to remove towel bar with slot?

To install a new towel bar and replace the one currently in use, you must change the whole setup. Unplugging the towel bar requires no assistance from anyone. You might handle it within a matter of minutes.

Different types of towel bars we use in our bathrooms. Both setup and removal methods are different, as well as how they look. There is no way to tell what type of towels you are using, but most people know what type. We will now explore the process of removing the most common type of towel bar. Bathroom towel bars are typically anchored on the wall with screws. Finding the screws is the main task.

How To Fix

Towel Bar With Set Screws

In today’s bathroom design and construction, towel bars are usually mounted using set screws.

1. You must carefully verify whether there are any screws under the towel bar’s handles. You probably have if you recently installed your towel bar.
2. There may be different types of screws available there. Depending on the screw, choose the appropriate screwdriver.
3. You should then loosen the screws with the screwdriver. Taking out the entire screw is not mandatory to remove the towel bar.
4. Similarly, unscrew the other side set screw.
5. It would help if you pulled it by hand to open the whole towel bar.
6. On the wall, you can see a slot for a towel bar.
7. The slot is attached to the wall with two or more screws.
8. With the screwdriver, unscrew these screws as before. An electronic screwdriver would be ideal for this job.
9. Once the screws are unscrewed, the slot will open.
10. Anchors are attached to the wall, and screws are attached there, so we don’t damage the wall. With a screwdriver, you can also unbolt the anchor.

Towel Bar With Invisible Set Screws

No worries if you can’t find a set of screws under your towel bar. Many towel bars do not have set screws on the outside. Therefore, you won’t find any screws the way you do. Having trouble finding the screw may cause you to consider breaking and opening the towel bar. However, there is no compelling argument to do so.

1. If there are no screws in the towel bar, you need to remove it with a slot in a slightly different way.
2. To start, twist one of the handles of the Towel Bar to the opposite side of the bar.
3. By twisting the towel bar 30-60 degrees, you will see the bar has popped up.
4. Turn the handle a few more times until it opens. It will remove the handlebar soon.
5. In the same way, remove the handle on the other side.
6. You will see a slot now. It may look different from the previous one. Whatever the size it is, round or rectangular, it doesn’t matter.
7. You will see the screw as before. Untie those screws as well.
8. Last but not least, remove the anchors.

Ceramic Towel Bar

The most commonly used towel bar is ceramic. There must be a ceramic towel bar in every bathroom. Every type of house, whether old or new, uses ceramics. Perhaps you’re also using one. So far, all the towel bars we’ve discussed have screws.

On the other hand, Ceramic towel bars don’t require screws due to the lack of screws in this towel bar slot. In this case, you need to exert some force. This hammer will prevent wall damage.

1. Ceramic towel bars are attached to the wall using strong glue without the need for screws. You cannot open glue once it has been applied. There is no other way to open this slot but by force.
2. You will need a hammer for this. Instead of using a hard metal hammer, we suggest using a wooden or soft metal hammer. Walls will suffer less damage this way. If you have an iron hammer, use it carefully.
3. Slowly strike the Towel Bar slot with the hammer. The strength of the glue will determine how fast the slot opens.
4. After applying force to the slot, if it still does not open, place a pry bar on one side against the slot and hit the other side hard with a hammer. It will open up the whole bar.

If you use any other type of towel bar than this one, you will need to remove the screws. When you cannot find the screw, try to twist the handles to see if they come apart. If you can still not open it, you can use a hammer. Hammer in the nail. Hit the slot hard and break it.

Fixing The Wall After Removing

Fixing The Anchor Holes After Removing The Towel Bar

So far, you have removed the towel bar. You can use the anchors from a previous installation if you install one there again. If you leave the space empty, the anchor holes will look very awkward. You can quickly and easily close the anchor holes.

1. Scraper is an ideal instrument for the job. Take a ready patch.
2. Then use a scraper to remove the loose dirt around the holes. If you see a fragile hole, make it bigger.
3. Next, patch up the holes with a little ready patch with a scraper. Your first attempt will appear uneven, but you will rectify it later.
4. In 4 to 5 hours, the patches will be dry.
5. You can now smooth out the patch with sandpaper.
6. Lastly, coat the patch with a smooth coating.

Fixing The Big Holes Caused By The Ceramic Towel Bar

There have already been warnings that you may damage your walls if you open the ceramic towel bar. But if you accidentally make a hole in the wall, you can repair it.

1. The first step is to cut a piece of plasterboard into squares, estimating the size of holes that have been made in the wall.
2. Cut the walls to the same size as the plasterboard.
3. The hole may be too large. In this case, screw a piece of wood behind the hole with screws.
4. Stick the plasterboard to the wall.
5. Now arrange the board in the desired position with a few mouse tapes.
6. Previously, we talked about the ready pitch. Once more, use a ready pitch to fill in the space between the board and the walls.
7. One day later, repeat the coding of the ready pitch and smooth the wall with sandpaper again.
8. Ultimately, your task is to paint the walls to match the color of the place. There is no way to tell for yourself that there was ever a ceramic towel bar here before. Here you can re-drill and install any other Towel Bar you like.

Final Suggestions

Regardless of the type of towel bar you use, you can remove it with the slot. If there are screws, it is easy as shelling peas. In the absence of screws, this situation is somewhat risky. If you don’t want to take any risks, contact a professional.

The screwed towel bar is easy to install and remove if damaged, so we strongly discourage using ceramic towel bars. However, if we think about quality, then the ceramic towel bar is better. I hope now you know how to remove towel bar with slot.