People do a lot of pranks to have fun. Notable among them is the wiring horns to the brake lights. It is a very popular and common prank. You can easily prank this with your family or friends if you want.
But before making fun of the prank mentioned, you need to know how to do this prank. And most importantly, how to wire horn to brake lights? In today’s article, we will learn how to easily do horn wiring to the brake lights of a car.
About Wiring Horn To Brake Lights
Yes, reader, this prank is so popular that it is practiced not only in our country but in every corner of the globe. Some do this prank with their family members, some with friends.
But no matter who you prank with, you have to be very skilled. You need to know how to do this prank, how to connect the wires. You have to do this very cleverly. Because if the person with whom you are doing the prank understands the matter, all your hard work will be wasted.
How To Wire Horn To Brake Lights – Amazing Technique
Let’s get to the core business. How to wire horn to brake lights? You might think the job is going to be very difficult. For your kind information, the task is not difficult at all. Do not take any extra pressure. No wiring is required for more than 10 minutes. Keep calm, and let’s focus on the procedures.
Requirements
- Wire;
- A horn with fairly high sound;
- Some scotch locks;
- Screwdriver.
Step 1
First, you will need a piece of cable. Make sure the cable is at least 10 to 15 feet long. However, the length of the cable will depend on your car. So what’s the problem with putting a little more cables?
Step 2
Find the brake sensor on the back of the brake pedal.
Step 3
Connect one end of the cable to the brake sensor. Attach the opposite end to the horn. Connect the positive phase brake sensor to the ground and the negative phase with the horn relay. It is best to connect the wires with scotch locks.
Step 4
The wiring horn to brake lights is ready. Must check before applying.
So, the horn wiring to brake lights is ready for your prank. Now go and prank with whomever you want.
How To Wire Horn To Turn Signals?
You can do horn wiring with a turn signal just like you do horn wiring with a car brake light. The procedure is as simple as the previous one. You can prank fun with a horn wiring with the turn signal. So let’s find out how to wire horn to turn signals.
Requirements
Same as wiring horns to brake lights.
Step 1
You can wire the horn to any turn signal in your vehicle. Each car has at least four turn signals on both the front and rear sides. First, choose which turn signal to wire the horn.
Step 2
Remove the turn signal protection glass with a screwdriver. Identify the positive and negative wires.
Step 3
Now take about 5 to 6 feet of wire. Connect one end of the wire with the positive phase of the turn signal and the negative phrase with the negative phase.
Step 4
Now connect the remaining end of the wire with the positive and negative points of the horn. Place the horn in such a place that the person you are pranking with cannot see. However, be careful not to place the horn in a place where such sounds are not completely audible.
Step 5
Before you prank, check yourself if everything is OK. If all goes well, then the horn wiring is completed.
Caution To Wire Horn To Brake Lights
Some pranks are friendly, but some are terrible. Car pranks are one of them. A little mess can lead to someone’s death. So care should be taken while doing the pranks.
Brake Sensor
Wiring horns to brake lights or turn signals can be dangerous because you are dealing with car brakes. When pranking, you have to keep the brakes of the car in order. When you connect the brake pedal to the sensor, make sure that the sensor is not damaged in any way. Otherwise, the driver may face an accident.
Aware Of Sick Person
Maybe the heart of the person you’re pranking is weak. Or there is someone in the neighborhood who is sick. In that case, of course, the loud sound of the horn is harmful to them. So do as much of the prank as possible in a place that is uninhabited or relatively uninhabited. Also, be sure that the person you are pranking is not ill.
Care About The Turn Signals
When you wire the horn with the turn signal, make sure the turn signals are active. There may be a moment when the turn signal is needed on an emergency basis during the prank. But the turn signal did not work due to your negligence. What will happen then?
Aware Of Electricity
However, all the functions of the cars are powered by the electricity generated from the batteries. However, due to misconduct, the connections may be overcharged or overpowered. So, take electric precautions. Use gloves when wiring. Make sure there are no loose connections.
Rewire The Miss Wirings
When the prank is over, rewire the miss wirings as soon as possible. Put everything back on as before. After rewiring, check if the connection is made properly. Blow the horn to see if it sounds properly. Try turning on the turn lights again and again. If something goes wrong in your eyes, fix it. If you can’t fix it yourself, get help from experts. If everything is OK, drive safely.
Conclusion
The prank thing is very pleasing. If all goes well, the prank’s outcome is delightful. But some pranks get tragic because of a little mistake. Wiring a horn to brake lights is a kind of prank where there should be no mistake.
You have to do the prank very carefully. You can easily wire the horn with brake lights by following the steps mentioned. If you can complete the prank properly, you will get a full enjoyment guarantee. I hope now you know how to wire horn to brake lights.
