Skip to content

How To Make A Round Concrete Form

When creating a round concrete form, it’s important to use the right tools and materials. Here’s what you’ll need:

1. A circular saw

2. A measuring tape

3. A hammer

4. Nails

5. A level

6. A piece of plywood

7. A piece of rebar

8. Concrete mix

9. A trowel

10. A bucket

11. A hose

To create your form, start by cutting the plywood into a circle that’s slightly larger than the desired diameter of your concrete form. Then, use the nails and hammer to attach the rebar to the plywood. Next, use the level to make sure the rebar is level, and then fill the bucket with concrete mix.

Now, begin filling the form with concrete, using the trowel to spread it evenly. Once the form is full, use the hose to wet the concrete, and then cover the form with a tarp.

Allow the concrete to cure for at least 24 hours before removing the form. To remove the form, simply hammer the nails out of the plywood, and then lift the plywood away from the concrete.

How To Make A Round Concrete Form

What Is The Best Way To Make A Round Concrete Form?

What Is The Best Way To Make A Round Concrete Form
When it comes to creating a round concrete form, there are a few different methods you can use. In this article, we’ll show you the best way to make a round concrete form using plywood and lumber.

This method is great for creating small to medium-sized forms. To get started, you’ll need to gather the following materials:

-Plywood
-Lumber
-Measuring tape
-Circular saw
-Drill
-1” hole saw
-Jigsaw

First, use the measuring tape to mark out the dimensions of your form on the plywood. Then, use the circular saw to cut out the piece.

Next, use the drill to create pilot holes around the perimeter of the plywood. Then, use the jigsaw to cut out the inside of the plywood, being careful not to cut into the pilot holes.

Now it’s time to assemble the form. To do this, you’ll need to cut the lumber into lengths that will fit around the perimeter of the plywood. Then, drill pilot holes into the lumber and screw it into the plywood.

Once the form is assembled, you can use the 1” hole saw to create a drain hole in the bottom. This will allow any water that seeps into the form to drain out.

Now you’re ready to pour your concrete. Simply fill the form with concrete, being careful not to overfill it. Then, use a trowel to smooth out the surface.

Allow the concrete to cure for 24 hours before removing the form. To remove the form, simply unscrew the lumber and carefully pull it away from the concrete.

There you have it! Now you know how to make a round concrete form.

What Are The Steps To Make A Round Concrete Form?

What Are The Steps To Make A Round Concrete Form

If you’re planning on pouring a concrete slab or footing, you’ll need to build a round concrete form to contain the wet concrete mix until it sets. It’s easy to make your own round concrete form using few materials and tools.

Materials

-1/2-inch thick plywood
-Circular saw
-Stakes
-String
-Hammer
-Nails
-Measuring tape

Instructions

1. Cut the plywood into strips that are 1 to 2 feet wide and 8 feet long using a circular saw.

2. Hammer two stakes into the ground at the desired location of the concrete form.

3. Tie a string around the stakes to create a circle that is the desired diameter of the concrete form.

4. Place the plywood strips around the string, overlapping the ends of the strips by 2 to 3 inches.

5. Nail the plywood strips to the stakes using 8d nails.

6. Remove the string and fill the form with concrete.

7. Smooth the concrete with a trowel and allow it to cure for 24 hours before removing the form.

What Are Some Tips For Making A Round Concrete Form?

What Are Some Tips For Making A Round Concrete Form

When pouring concrete, it is important to have the round concrete form in place. This will ensure that your concrete is the right shape and size. Here are some tips for making a round concrete form:

1. Cut a piece of plywood that is slightly larger than the diameter of the circle you want to make.

2. Attach the plywood to the form with screws or nails.

3. Place the form on a level surface.

4. Mix the concrete according to the manufacturer’s instructions.

5. Pour the concrete into the form.

6. Use a trowel to smooth the surface of the concrete.

7. Let the concrete cure for the amount of time recommended by the manufacturer.

8. Remove the form and enjoy your new concrete feature!

What Are Some Things To Avoid When Making A Round Concrete Form?

What Are Some Things To Avoid When Making A Round Concrete Form

When making a round concrete form, there are a few things you’ll want to avoid. First, don’t use regular wood. The moisture from the concrete will cause the wood to rot and break down, eventually leading to your form collapsing. Instead, use treated lumber or marine-grade plywood.

Second, avoid using nails to assemble your form. The nails will rust and weaken over time, causing your form to fall apart. Instead, use screws or bolts to hold everything together.

Finally, don’t use a tarp or plastic sheeting to cover your form. The weight of the concrete will cause the tarp to sag, creating an uneven surface. Instead, use a sheet of plywood or a piece of cardboard.

By following these simple tips, you can avoid common mistakes when making a round concrete form.

Conclusion

After reading this article, you should have a good understanding of how to make a round concrete form. Remember to follow the instructions carefully and take your time to create a high-quality form. With a little practice, you’ll be able to make round concrete forms quickly and easily.

If you still have any questions about how to make a round concrete form, feel free to leave a comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *