Skip to content

How To Make Frames Without Miters – The Fastest Way

Frame-making is an old craft used to create beautiful art pieces for centuries. To save time and effort when framing your photos, you should try using frames without miters.

Not only are these frames easier to assemble, but they also look more professional – perfect for displaying your photos in any room of your house.

This article will show you how to make frames without miter saws or clamps – a skill that will help you save time and money. By following our simple steps, you’ll be able to create beautiful frames in no time.

How To Make Frames Without Miters

What Are Miters, And Why Are They Used In Frame Making?

What Are Miters, And Why Are They Used In Frame Making

A miter is a joint made by beveling each of two parts to be joined, usually at a 45° angle, to form a corner, usually at a 90° angle.

If you’ve ever looked at a picture frame, you’ve probably noticed that the corners are usually cut at an angle. These angled cuts call miters. Miters use in frame making because they create a much stronger joint than a simple butt joint (where the pieces place flush against each other).

Here’s a quick example to show you how miters work. Let’s say you have a piece of wood that’s 10 inches long and want to cut it in half at a 45-degree angle.

If you cut it with a miter, you’ll have two pieces exactly 5 inches long. But if you cut it with a butt joint, you’ll end up with two pieces, each about 4.3 inches long. As you can see, the miter creates a much cleaner, stronger cut.

What You’ll Need

  • One sheet of plywood or hardboard – any size will do, but the larger the piece of wood, the more layers it will need
  • 24 inches long by 1-inch wide pine board – cut into 12 -inch-wide pieces
  • Tape measure
  • Doweling and dowels
  • Ruler or measuring tape
  • Circular saw with blade at least 16 inches wide, if desired Sandpaper
  • Clamps

How To Make Frames Without Miters – 3 Fabulous Ways

3 Fabulous ways to make frames without miters

Creating frames without miter saws or clamps can be a great time-saving option if you’ve been looking to create beautiful pieces of art for centuries. Here, we’ll show you how to make simple frames using basic woodworking tools and materials. By following our 3 way, you’ll be able to create stunning frames in no time. Here are the first way below:

Step One:

Begin by cutting your plywood or hardboard into the desired size. We used a sheet of plywood 24 inches long and 1 inch wide, but you can use any size you like.

Once it’s cut to shape, lay it on a work surface so that one end faces up. Place one of the pine board pieces across the wood panel’s length, ensuring that both ends line up perfectly.

Trace around the edge of each piece with your tape measure – keep track of where each miter cut begins and ends. Cut the pine board pieces out with your miter saw to the traced lines. Save all of the cut pieces for later use.

Step Two:

Once you’ve cut your plywood or hardboard pieces, it’s time to start assembling your frame! First, line up one end of each piece along one side of the plywood panel using a clamp.

Drive two screws into each end of each piece (at approximately 1 inch from the edge), then repeat on the other side of the panel. Ensure both clamps are tight – you don’t want your frame to shift during the next step!

Step Three:

Now it’s time for the fun part: mitering! Using the miter saw, cut a 45-degree angle on one end of Each Piece, Then Repeat On The Other.

Make Sure You Track Where Each Miter Cut Begins And Ends – this will help ensure that your frames are perfectly symmetrical. Once you’ve completed all your cuts, remove the clamps and sand them down until they’re smooth.

Step Four:

Finally, it’s time to add some finishing touches to your frames. First, paint or stain the edges of each frame using multiple colors. We used wood glue and deck screws to attach decorative trim to our frames, but you can use anything you like – picture hangers, plexiglass, etc. Once your frame finishes, enjoy your new DIY framing project.

The Second Way To Make Perfect Frames

The Second Way To Make Perfect Frames

Frames are a great way to add a touch of personality to any room. But you are making them can be a time-consuming and frustrating process.

That’s why we’ve got the perfect tips for you. First, use a jigsaw to cut the sides of the frame without miter cuts. This will give your frames a rustic and unfinished look. The walls will be slightly shorter than you need, but they’ll still hold up well in transit and display.

Secondly, glue and screw the side panels together using screws instead of nails, which saves time and gives your frames an unfinished look.

Hang your frames on wire hangers, or use picture hooks to keep them organized and easy to access! With these tips in mind, you’re on your way to making perfect frames in no time.

The Third Way To Make Frames Without Miters

The Third Way To Make Frames Without Miters

You can make frames without using miters by using a rabbet joint. If you’re looking to add a little extra something to your decor without using miters, frames are a great way to do it. Here’s a step-by-step guide on how to make them:

  1. Decide on the size and shape of your frame. This will determine how much material you’ll need and what kind of cuts you’ll have to make.
  2. Cut your pieces to size. If you’re using a saw, be sure to use a blade that’s meant for cutting the material you’re using (i.e., a wood-cutting blade for wood).
  3. Assemble your frame. This can do with nails, screws, or even glue. Make sure that whatever method you use will securely hold the frame together.
  4. Hang your frame and enjoy.

Let’s say you want to make a rectangular frame that’s 12″x16″. You would start by cutting four pieces of wood that are 12″ long and two pieces that are 16″ long.

Then, you would assemble the frame by attaching the 12″ pieces to the 16″ pieces using either nails, screws, or glue. Once the frame assemblies are, you hang it up and enjoy your handiwork.

Some Alternatives To Using Miters When Making Frames

Some Alternatives To Using Miters When Making Frames

Some alternatives to using miters when making frames are dowels, splines, or biscuits. Creating your own picture frames is a great way to do it if you’re looking to add a personal touch to your home décor.

And while miters are commonly used to create frames, a few alternative options can give your project a unique look.

One option is to use dowels. To do this, you’ll need to drill holes in each corner of your frame. Then, cut dowels to size and glue them into the holes. Once the glue is dry, sand the dowels flush with the frame and paint or stain as desired.

Another option is to create a rabbet joint. This involves cutting a groove along the inside edge of each frame piece. Then, fit the pieces together and secure them with nails or screws. You can also use a router to create a rabbet joint, giving your frame a professional look.

Finally, you could use simple butt joints. To do this, line up your frame pieces and secure them with nails or screws. This is the easiest option and doesn’t require special tools, but it doesn’t offer as much stability as the other two options.

The Benefits Of Making Frames Without Miters

The Benefits Of Making Frames Without Miters

The benefits of making frames without miters are that they are quicker and easier to make and more forgiving if the frame is not perfectly square. When it comes to woodworking, one of the most important considerations is the type of joinery you use.

Miters are a popular choice for many projects, but there are times when another type of joinery, such as a butt joint, would be a better option. Here are some benefits of making frames without miters:

Step 1

Butt joints are stronger than miters. When you’re joining two pieces of wood at a 90-degree angle, a butt joint is much stronger than a miter joint. This is because the end grain of the wood is glued directly to the side grain, creating a stronger bond.

Step 2

Butt joints are easier to assemble. With a miter joint, you must be precise in your measurements and cuts for the joint to fit together correctly. With a butt joint, however, you can butt the two pieces of wood together and secure them with screws or nails.

Step 3

Butt joints are less likely to open up over time. Because the end grain is glued directly to the side grain, there’s less of a chance that the joint will open up over time. With a miter joint, the end grain is only glued to the side grain at the tip of the joint, so there’s more of a chance that the joint will open up over time.

Step 4

Butt joints are more forgiving. If you don’t get the cuts perfectly precise with a miter joint, the joint will be very noticeable. With a butt joint, however, any slight imperfections will be much less noticeable.

Step 5

Butt joints are more versatile. You can use a butt joint to join two pieces of wood at any angle, not just 90 degrees. This makes them much more versatile than miter joints. Now that you know the benefits of making frames without miters, you can decide if this type of joinery is right for your next project.


With the help of advanced machines, woodworkers can do wonders now. However, it would help if you kept some things in mind that will make your frames successful. Firstly, shop for quality materials and use good-quality tools while crafting them. Then sit back and watch the beauty unfold before your eyes.

After writing all this, you must feel happy about making frames without miters. If you want to add more color and style to your room, consider adding a few of these frames. In this article gives you the fastest and easiest way to create beautiful frames. Make sure to follow the above steps to get perfect frames every time.


1. What Type Of Wood Should I Use For A Frame Without Miter Joints?

Ans: Any wood will work fine for a frame without miter joints if the pieces are properly cut and assembled. However, if you want to create a frame specifically designed to resist weathering (such as an outdoor frame), then using woods such as oak or maritime pine would be your best option.

2. What Are The Drawbacks Of Making Frames Without Miters?

Ans: When frames are made without miters, the corners are not as strong as they would be if miters were used. The corners are also not as clean and crisp looking as they would be with miters.

3. How Can You Avoid The Need For Miters When Making Frames?

Ans: If you use a rabbet joint to join the corners of your frame, you won’t need miters. A rabbet is a groove cut into the edge of a piece of wood, and it’s a very strong way to join two pieces of wood at right angles.

4. What Are Some Tips For Making Frames Without Miters?

Ans: There are a few different ways that you can make frames without miters. One way is to use a rabbet joint, a cut made along the inside edge of the wood.

This type of joint is very strong and can use for both picture frames and door frames. Another option is to use a dowel joint, which is created by drilling a hole through the wood and then inserting a dowel into the hole.

This type of joint is also very strong and can use for both picture frames and door frames. Finally, you can use a butt joint, the most basic type. This joint is created by simply butting two pieces of wood together.

5. How Can You Troubleshoot Problems When Making Frames Without Miters?

Ans: There are a few things you can do to troubleshoot problems when making frames without miters. First, make sure your cuts are straight.

Second, use a clamp to hold the pieces together while you are assembling the frame. Third, use a file or Sandpaper to smooth out any rough edges. Finally, if you are still having trouble, consult a professional.

Leave a Reply

Your email address will not be published. Required fields are marked *